Logging In
Invalid username or password.
Incorrect Login. Please try again.

not a member?

Signing up could earn you gear and it helps to keep offensive content off of our site.

June 04, 2013

Add a Tower to Your Fishing Boat

Raise your game by installing a tower on your boat.

[Be sure to click through all the images in the gallery above.]

Zane Grey started the trend. The legendary angler and Western novelist was among the first to put a “crow’s nest” on his yacht to spot sunning swordfish off the California coast in the 1920s. The concept quickly evolved, and now it’s rare to see a blue-water convertible without a tuna or marlin tower rising high above the flying bridge. But as many owners of outboard-powered center consoles and cuddy cabins also have discovered, towers ­increase light-tackle and sight-fishing options for smaller craft too.

Scaled Down

“If you’re a dedicated fisherman, once you’ve had one, you’ll never go back,” says David Gore, co-owner of Gore Marine Metal Fabricators in Wilmington, North Carolina. In business with his brother Danny for 26 years, Gore says his primary tower customers are those who enjoy nearshore sight-fishing or trolling the Gulf Stream. He recently installed an observation tower over the console of a 24-foot Triton bay boat so the owner could locate cruising cobia.

“The additional height gives a different angle that really lets you see down into the water,” adds Kevin Meisman of Quality T-Tops in Tarpon Springs, Florida. “From a tower you can spot floating debris — like pallets and weed lines, which hold dolphin and other fish — from a greater distance. Plus, being up there gets the driver away from the cockpit when things are hectic during multiple hookups. That allows him to evaluate the situation and ­coordinate the activity like a traffic cop to successfully land the fish.”

Wide Range

Tower options for small to midsize outboard boats run the gamut from a simple padded observation frame with the top of the console as the base, to a full tower with second-station controls, electronics, shade and rod storage. Prices start at $6,000 for a very basic tower with a hydraulic helm, and they go up from there, Meisman says.

“The sky is the limit, budgetwise,” he explains. “Each job can be customized to add whatever the owner wants. A simple, nonhinged tower frame alone will run $3,500 at a minimum. If you have a 36 Grady with triple ­outboards, and we do a custom fiberglass hardtop base, a full tower with electronic controls and helm, bolsters, rod holders, and a fiberglass buggy top, you would be looking at up to $40,000.”

Legal Fit

Besides budgetary limitations, there are other important factors to consider when choosing a tower style. If you trailer your boat, overall height clearance is dictated by state highway laws. In Florida, for example, the standard limitation is 13 feet, 6 inches, so the dimensions of the hull sitting on top of the trailer must be factored in. Make sure it’ll clear the garage door or storage shed too. If you plan to leave the boat in the water, keep in mind low bridges between the slip and open water that would hinder passage.

“The standard height of our towers is usually seven feet high,” says Gore. “We don’t have as many low bridges here as they do in South Florida, although we still build hinged towers for boats that are trailered. On those we weld fittings into the ­aluminum pipes, which allow separation on demand with pinned joints. Ninety percent of the time, the towers fold aft into the cockpit so the radar antenna and other components are better protected.”